Below is the list of all the schematic circuit used for the simulation:

1) TB_16BIT_CLA_CARRY: This was used for all simulation of the 16bit Dual Vt CLA.

Devices with VTH included in their names are high Vt devices while those with VTL are low Vt devices 

2) 16BIT_CLA_CARRY_WITH_SLEEP: This was used for all the simulation of the 16bit Dual Vt with sleep transistor CLA. 

Devices with VTH included in their names are high Vt devices while those with VTL are low Vt devices.

3) ALL_VTL_16BIT_CLA_CARRY1: This was used for all the simulation of the 16bit single Vt CLA. it is made up of low Vt devices.

4) SINGLE_VTL_AND_SLEEP: This was used for all the single Vt with sleep transistor Domino AND gate. 

it is made up of low Vt devices.

5) 2_INPUT_VTL_AND: This was used for the standard single Vt simulations. it is made up of low Vt devices.

6) 2_INPUT_AND: This was used for all the Dual Vt 2 Input domino AND logic simulations. it is made up of high Vt (VTH) devices and low Vt (VTL) devices.

7) 2INPUT_DUALVT_AND_WITH_SLEEP: This was used for all the simulation of the 2 input dual Vt with sleep transistor. it is made up of both high and low Vt devices.




